The AT88SC0104CA-SH is a model from Atmel Corporation, which is now part of Microchip Technology, a well-known company in the semiconductor industry.
As for the pinout and detailed function specifications, I can give you a general overview of what you're asking about. However, providing the exact pinout and full specifications would require the datasheet of that specific part, which I recommend you reference directly from Atmel/Microchip's website or contact their technical support.
Let me give you a template of the kind of detailed pinout and FAQ you might expect based on a typical microcontroller or EEPROM like the AT88SC0104CA-SH. Please note, however, that the exact details can vary, and the information below is an example and should be verified with the datasheet.
Pin Function Specifications of AT88SC0104CA-SH
Pin Number Pin Name Pin Type Description 1 VCC Power Supply voltage for the device. Typically 3.3V or 5V. 2 GND Ground Ground connection. 3 SCL Input/Output Serial clock input for communication. 4 SDA Input/Output Serial data input/output. 5 RESET Input Reset input. Typically active low to reset the device. 6 CS Input Chip Select for enabling or disabling communication. 7 WP Input Write Protect input. Prevents accidental write operations. 8 NC N/A No connection (often used for test purposes or not connected in certain versions). 9 VCC Power Additional VCC pin for redundant power supply (if present). 10 GND Ground Additional ground pin. … … … …Package and Pin Count
The AT88SC0104CA-SH typically comes in an 8-pin SOIC or TSSOP package, but the specific package type should be verified via the datasheet.20 Frequently Asked Questions (FAQ)
Q: What is the supply voltage range for the AT88SC0104CA-SH? A: The AT88SC0104CA-SH operates within a supply voltage range of 2.7V to 5.5V.
Q: How many pins are present in the AT88SC0104CA-SH? A: The AT88SC0104CA-SH typically has 8 pins.
Q: What is the maximum clock speed of the AT88SC0104CA-SH? A: The device supports a maximum clock speed of 400kHz.
Q: What type of communication does the AT88SC0104CA-SH use? A: It uses I2C (Inter-Integrated Circuit) serial communication.
Q: Can the AT88SC0104CA-SH be powered by 5V? A: Yes, the device can be powered with a 5V supply voltage.
Q: How do I reset the AT88SC0104CA-SH? A: The device can be reset by applying a low signal to the RESET pin.
Q: What is the function of the WP pin? A: The WP (Write Protect) pin is used to prevent accidental write operations to the Memory .
Q: What is the significance of the CS pin? A: The CS (Chip Select) pin is used to enable or disable the communication with the device.
Q: Does the AT88SC0104CA-SH support multiple device connections on the same I2C bus? A: Yes, the device supports multiple devices on the same I2C bus, provided each has a unique address.
Q: Can I use the AT88SC0104CA-SH in low-power applications? A: Yes, the AT88SC0104CA-SH is designed for low-power applications.
Q: Is the AT88SC0104CA-SH compatible with 3.3V logic levels? A: Yes, the AT88SC0104CA-SH can be used with 3.3V logic levels.
Q: How do I program data into the AT88SC0104CA-SH? A: Data is programmed into the device using I2C communication.
Q: Can the AT88SC0104CA-SH be used as an EEPROM? A: Yes, the AT88SC0104CA-SH is an EEPROM ( Electrical ly Erasable Programmable Read-Only Memory).
Q: What is the memory size of the AT88SC0104CA-SH? A: The AT88SC0104CA-SH has a memory capacity of 1KB.
Q: How do I check the status of the AT88SC0104CA-SH? A: The status of the device can be checked by reading specific registers via I2C communication.
Q: Is there an onboard voltage regulator in the AT88SC0104CA-SH? A: No, the AT88SC0104CA-SH does not have an onboard voltage regulator.
Q: What is the maximum current draw for the AT88SC0104CA-SH? A: The device typically draws around 1mA in active mode and less than 1µA in sleep mode.
Q: Does the AT88SC0104CA-SH have any built-in protection against overvoltage? A: No, overvoltage protection is not specifically mentioned for this part, so external protection might be needed.
Q: What is the recommended operating temperature range for the AT88SC0104CA-SH? A: The recommended operating temperature range is -40°C to 85°C.
Q: Where can I find the complete datasheet for the AT88SC0104CA-SH? A: The complete datasheet for the AT88SC0104CA-SH can be found on the official Microchip (Atmel) website.
This format provides a general template for what the pinout and FAQ would look like. For exact details, you should consult the specific datasheet for the AT88SC0104CA-SH, as the information provided here is generalized.
