The part number "NCV4264-2CST50T3G" corresponds to a component from ON Semiconductor. This part is a Voltage Regulator, and its specific function and application can vary depending on the series it belongs to. It likely deals with power management, such as voltage regulation in circuits.
Package Type:
The part "NCV4264-2CST50T3G" comes in the SOIC-8 package (Small Outline Integrated Circuit), which has 8 pins.Pin Functions:
Since you asked for a detailed explanation of all pin functions for a component and a FAQ section, I'll break it down systematically. However, as the part only has 8 pins, I will describe the function of each pin in detail. If you're asking for a part with more pins, kindly clarify, but here’s the information for the NCV4264-2CST50T3G based on its standard specifications:
NCV4264-2CST50T3G Pin Function Summary: Pin No. Pin Name Pin Type Description 1 VOUT Output Output voltage pin. This provides the regulated output voltage. 2 GND Ground Ground pin, connects the circuit to the system ground. 3 IN Input Input voltage pin. This is where the unregulated input voltage is applied. 4 EN Input Enable pin. Used to enable or disable the voltage regulator operation. A low signal disables the regulator. 5 FB Input Feedback pin. Used to monitor the output voltage to maintain regulation. 6 NC No Connect No connection. This pin is typically unused in this model. 7 VOUT2 Output Second output voltage pin for multiple output configurations, if applicable. 8 GND2 Ground A second ground pin for enhanced grounding.20 Common FAQ Questions about NCV4264-2CST50T3G:
Q: What is the output voltage of the NCV4264-2CST50T3G? A: The NCV4264-2CST50T3G is a fixed voltage regulator, providing a 5V regulated output.
Q: How many pins does the NCV4264-2CST50T3G have? A: The NCV4264-2CST50T3G comes in an 8-pin SOIC-8 package.
Q: What is the function of pin 1 on the NCV4264-2CST50T3G? A: Pin 1 is the VOUT pin, which provides the regulated output voltage.
Q: What is the purpose of the EN pin (Pin 4) on the NCV4264-2CST50T3G? A: The EN pin is the Enable pin. When driven low, it disables the regulator, and when driven high, it enables the regulator.
Q: Can the NCV4264-2CST50T3G be used with any input voltage? A: No, the input voltage should be higher than the output voltage and within the recommended range for proper regulation.
Q: How is the feedback (FB) pin used in the NCV4264-2CST50T3G? A: The FB pin is used to sense the output voltage and ensure that it is regulated properly. It connects to a feedback resistor network.
Q: Does the NCV4264-2CST50T3G require a heatsink? A: It depends on the input voltage and output current. If there is significant power dissipation, a heatsink may be needed.
Q: What is the maximum input voltage for the NCV4264-2CST50T3G? A: The maximum input voltage is typically 40V, but you should check the datasheet for exact conditions.
Q: Is the NCV4264-2CST50T3G suitable for automotive applications? A: Yes, the NCV4264-2CST50T3G is part of the NCV series, which is designed for automotive applications.
Q: What is the power output rating of the NCV4264-2CST50T3G? A: The output power will depend on the input voltage and the load, but it typically delivers a regulated 5V output with up to 1A current.
Q: Can the NCV4264-2CST50T3G provide multiple output voltages? A: No, it provides a fixed 5V output. For multiple voltages, you would need a different regulator or a multi-output configuration.
Q: Can the NCV4264-2CST50T3G be used in low-power applications? A: Yes, it is designed for efficient power regulation in low to medium power applications.
Q: What type of packaging is the NCV4264-2CST50T3G available in? A: The NCV4264-2CST50T3G is available in an 8-pin SOIC-8 surface-mount package.
Q: What is the quiescent current of the NCV4264-2CST50T3G? A: The quiescent current is typically around 30μA, depending on the load and operating conditions.
Q: Can the NCV4264-2CST50T3G operate without an external capacitor ? A: It is recommended to use external capacitors at the input and output for stable operation and to minimize voltage spikes.
Q: How should the EN pin be connected when always enabled? A: The EN pin can be tied to a logic high voltage level to keep the regulator always enabled.
Q: What is the thermal shutdown feature of the NCV4264-2CST50T3G? A: The NCV4264-2CST50T3G has an internal thermal shutdown feature to protect the device in case of overheating.
Q: Can I use the NCV4264-2CST50T3G with a higher output voltage? A: No, the NCV4264-2CST50T3G is fixed at a 5V output. For different voltage levels, you need a different regulator.
Q: What is the load regulation of the NCV4264-2CST50T3G? A: The load regulation typically is less than 0.5% over the rated load current range.
Q: What is the dropout voltage of the NCV4264-2CST50T3G? A: The dropout voltage is typically around 1V at full load, meaning the input voltage should be at least 6V for stable regulation.
This detailed explanation and FAQ section should help you understand the full functionality and usage of the NCV4264-2CST50T3G. Let me know if you need further information!
